How to restart your Mac remotely?

How to restart your Mac remotely?


Readers need to restart their Mac at a time when it is out of reach of the arm – or even out of the reach of the walking legs. He wonders what options are available with the modern Mac.

Its Maxime is located on a machine-generated network, so it has a privately assigned IP address using Net (Network Address Translation).

There are two options here: because while the Mac is still removing but not doing what you want, you may want to restart it if only you can remotely contact it. Or when the Mac is capable and crashing or experiencing other difficulties, and you want to take it off the power.

Connect to a working Mac remotely

You can control the Mac remotely with both screen sharing and remote terminal access, but access to the Internet on this Mac is often in the air.

Although Mac OS includes Back to My Mac, which connects Mac with iCloud to allow remote access through a screen-sharing app, it is only a regular configuration of other Macs signed into the same IC Cloud account. I work Apple doesn’t offer access to guests from other Macs – although you can temporarily set up an account on another Mac – nor does it have the iOS app.

Behind the Mic Mac and the screen-sharing app, you can use the common screen sharing protocol VNC. (Just to be more confusing, Apple’s screen sharing app is based on VNC, but not the same.) VNC can work on Back to My Mac, but not always because it’s not an auxiliary feature. Third-party Max and iOS apps let you access any VNC-enabled system.

Enable screen sharing in the Sharing System’s preferences pane, and click the Computer Settings button to turn on VNC. Warning! Always set a strong password for VNC, as it is easy for attackers to scan VNC and access your internet.

Back on my Mac fails with the situation of “Double NAT”, which unfortunately I have and which is not rare. A double NAT usually occurs when the ISP provides a modem that also acts as a router, and which has features that you cannot duplicate or turn off.

If you connect, say, Airport Xtreme with DHCP and NET enabled LAN port on ISP modem, You are creating a NAT within a NAT. All outbound connections work fine, but inbound edges can be messy. (In my case, the modem provided has some obscure networking features used by CenturyLink’s fiber-optic network.)

Instead of relying on Mac OS, you can turn to third-party remote access software, even though my favorite works have run out and left active development, while free or cheap flavors are commercial and expensive.

Visit more: TechsTribe

Team Weaver is an exception, which is for permanent development and personal, non-commercial use. It is free It can punch through a double NAT.

And it’s my favorite device that works on virtually every platform, including Mac OS and iOS. If you’re using it for business purposes, the company charges a hefty rate from the company, starting at 50 50,850 for a three-fold permanent license. For business users without a big budget, I recommend LogMan, which is $ 250 per year for two devices.

Chris Bryan’s 2012 direction regarding the use of SSH to restart or shut down Mac via a terminal session is correct, so I’ll refer you there. But creating a remote terminal session via SSH, a secure protocol that relies on the Internet, requires setting up port mapping on a router or Wi-Fi base station using DHCP reservations. (So ​​your Mac has the same private IP address all the time) and NAT port forwarding (so the Cubic Hole map of the network accessing the Mac you want).

Unfortunately, Apple no longer offers detailed guidelines for airport configuration, as it did years ago. I’m reluctant to bite my own horn, but if you need to configure this kind of remote access for SSH or other services, you can control your book, your Apple Wi-Fi. You will find complete instructions on this topic. Network


Leave a Comment